LED series light strip is a light strip composed of 60 lights with 20 pixels. A single pixel is controlled by a chip and three LED lights change colors at will. High brightness, good waterproof performance (drop glue and sleeve), easy installation (bare plate and drop glue behind double-sided adhesive). Can achieve chasing, water, magic color, breathing lights and other programming effects. Long service life (normal life in 30,000 ~ 50,000 hours) energy saving and environmental protection, low voltage safety.

Main features of led corn bulb factory

1 control principle: an IC control 3 LED composed of a loop (a group), the controller through the control IC to control LED beads change out of different effects; Such as flashing, chasing, jumping, clockwise horse running, breathing, monochromatic horse running, color-changing horse running, single chasing from beginning to end, water, etc.; Can also according to customer needs, write their own, write all the desired results.

2. Environmental protection and safety: using high quality bright SMD5050RGB lamp beads, with low power consumption, less heat, no glare, impact resistance and other characteristics, low voltage DC 12V power supply, higher safety and reliability.

3. Constant current chip: SM16703PB is a 256-level gray level 4-channel breakpoint continuation LED constant current driver chip, supporting 300-900ns return-zero code protocol, compatible with single-line return-zero code protocol. Chip built-in RGB three-way PWM constant current driver. The driving current of each channel is 17mA, and the constant current accuracy is good. The 3-channel PWM output can achieve 256 gray level at 1K refresh rate, and the mobile phone camera has no ststrobe. The chip can realize the control of color lattice luminescence with 256 level gray level by MCU control and cascade control.

Installation and Use of led corn bulb factory (Figure 2)

Note:

In the actual operation process must pay attention to the connection distance of the LED lamp belt. Generally speaking, the longest connection distance of the 3528 series LED light belt is 20 meters, and the longest connection distance of the 5050 series LED light belt is 15 meters. If beyond the connection distance, the LED light belt is easy to heat, the use of the process will affect the service life of the LED light belt. Therefore, the installation must be in accordance with the requirements of the manufacturer, do not let the LED light with overload operation.

led corn bulb factory https://www.zliec.com/LED-Ecolume-Corn-Lamp